Linksys smart WiFi routers are splendid networking devices which endow you with full access to your home or office WiFi network. With these devices, you can check the connection status, create a guest network for your friends and family members and secure your kids from accessing dangerous websites. But due to bandwidth limitation, you may get buffering in your router network. And in turn, you see the Linksys smart WiFi setup not working error.
However, there is no particular reason behind this issue. Sometimes, it occurs due to:
- The problem from your ISP
- Incompatible web browser
- Outdated router firmware
- Slow internet connection
- Your little mistakes to complete your router setup
As a result, the issue appears. But with a little troubleshooting, you can resolve this issue with ease. Let’s get to know how to fix it.
Solution to Linksys Smart WiFi Not Working
- Is Your Internet Slow?
On the off chance that slow internet connectivity is the culprit, you must know that whether it slows down because of the over usage of data or your data has expired. In addition to this, chances are that your connection is getting trouble from your Internet Service Provider side. That’s why you need to contact your ISP to resolve the problem.
Apart from this, delete the temporary files from your device connected to the router. Once done, try accessing the default Linksys smart WiFi login page. If it works, it means that your internet connection is working fine.
- Running Outdated Router Firmware?
Firmware updates come with functionality improvements and bug fixes for your router. Having the latest firmware version on your Linksys router is important as it resolves the smart setup issues. To update the Linksys smart WiFi router’s firmware,
- Download the latest version of router firmware onto your PC.
- Now, log in to your Linksys cloud account.
- Once logged in, click on the Firmware update section.
- Choose the downloaded firmware file and click open.
- A pop-up box will come into view. Just click on yes button.
Your Linksys smart WiFi router will start updating the firmware. After that, the router will reboot.
- Are You Using Non-Supportive Web Browser?
If you are getting the issue due to the web browser you use, make sure to delete its cache, cookies, history and other junk files. Possibilities are that your web browser doesn’t provide extender.linksys.com support. In this case, update your browser to the latest version. If you are still having the same issue, use another browser (Internet Explorer, Google Chrome, Mozilla Firefox, etc.).
- Did You Make Any Mistake While Setting up Your Linksys Router?
Be 100% sure that you set up your Linksys smart WiFi router properly by following each step carefully. Once you connect the Linksys router, modem and PC with one another, you need to wait until its blinking LED becomes stable. After that, access the router login page using the default IP address. Using the correct credentials, go to the smart setup page and follow on-screen setup instructions.
- Last But Not Least, What About Router Resetting?
So you are done with the proper router setup but still it can’t connect to Linksys extender Or are you facing the same issue? Worry not! Try resetting your Linksys smart WiFi router to the default factory settings. To do so:
- Long press the reset button on your router.
- Once done, restart the router.
- Now, remove the connection between all your devices and reconnect them again after a few seconds.
Remember that reset will delete all the previous settings you have made.
Thus, you can fix Linksys smart WiFi not working issue whether it is due to slow internet connection, improper router setup, obsolete firmware or incompatible web browser.